SIAT Toolss
Battery Sealer- ELECTRA™ STDC
The SIAT ELECTRA ™ battery tensioner and the double crimp battery sealer for steel strapping
type EN 13247 are the new SIAT strapping tools that allow you to maximize the strapping results
for lifting, anchoring and securing extremely heavy loads in complete safety, and without any
need for compressed air!
- Strapping Specification Steel
- strapping type EN 13247
- Strapping Width mm (“) 32 (1¼”)
- Strapping Thickness mm (“) 0,80 ÷ 1,27 (0.02 ÷ 0.05)
- Strapping Tension Adjustable from 1000 to 12000 N
- Tension Speed mt/min (ft/min) 5,7 (18.7)
- Amount of cycles achievable
(battery fully charged) 200 - Tool Dimension
(L x H x W) mm (“) 450x134x159 (17.7×5.3×6.3) - Tool Weight kg (lb) 5,5 (12)
with the battery installe…..
Battery Sealer- ELECTRA™ STDC
SIAT’s battery-operated tensioner for steel strapping are SIAT’s new professional tools that maximize strapping results for steel strapping, for regular or irregularly shaped packages. The sealers are available for strap widths: 19 : 32 mm.
- Makita Lithium Battery completely charged in 20 minutes
- No Air Supply – it does not require the compressor and the tiring maintenance operations that this entails (such as oil change)
- Battery and end-of-cycle indicator – to monitor the charge of the battery and the end-of-the-cycle
- More than 200 cycles – both with the sealer and the tensioner
- One push button operation – the entire cycle of notching and opening the tool is done by pressing and holding the operational button
- Makita brushless motor is a high-performance motor that allows acceleration and deceleration, which is impossible in on-off pneumatic solutions
- Reversing function-the motor allows the strap to be released after it has been tensioned, to ensure maximum safety in case of trapped objects
Battery Sealer for Steel Strapping – ELECTRA™ M SERIES
SIAT’s battery-operated double-notch sealer for steel strapping are SIAT’s new professional tools that maximize strapping results for steel strapping, for regular or irregularly shaped packages. The sealers are available for three widths: 19, 25, 32 mm
-
Double Notch Sealing – our tools are designed for a double notch seal which has two sets of notches in the steel strapping seal
- Makita Lithium Battery completely charged in 20 minutes
- No Air Supply – it does not require the compressor and the tiring maintenance operations that this entails (such as oil change)
- Battery and end-of-cycle indicator – to monitor the charge of the battery and the end-of-the-cycle
- More than 200 cycles – both with the sealer and the tensioner
- One push button operation – the entire cycle of notching and opening the tool is done by pressing and holding the operational button
- Makita brushless motor is a high-performance motor that allows acceleration and deceleration, which is impossible in on-off pneumatic solutions
- Reversing function-the motor allows the strap to be released after it has been tensioned, to ensure maximum safety in case of trapped objects
Pneumatic Tensioner STTR 19-32
It is a easy to use pneumatic tensioner to be used in conjunction with STP, STP-DN, STPM, SDN models. It is designed to use in heavy industrial applications. It is available as standard with push button version. On request it is available the choke collar version. The tool is available as standard in 3 strap sizes: 19 mm, 25 mm and 32 mm.
-
- Package type: flat / round surfaces
- Strap quality: steel (Rmax. 1100 N/mm²)
- Strap width: from 19 mm up to 32 mm
- Strap thickness: from 0.6 mm up to 1.1 mm
- Max. tension: 9000N
- Max. tensioning
- speed: 6 m/min.
- Air pressure: 6 – 7 bar max.
- Air consumption: 12 l/s
- Weight: about 4.2 Kg
Pneumatic Sealer STP-DN 19-32
STP 19-32
Pneumatic sealer with single notch seal for steel strap
Pneumatic Sealer, Model STP 19-32 for steel strapping.
“User friendly pneumatic sealer, rugged design and reliable to use in industrial applications. The sealer group could be turned to have an ergonomic and confortable use, Available standard in three sizes: 19mm(3/4”), 25mm(1”) and 32mm(1-1/4”).”
4o
Pneumatic Sealer STP 19-32
Pneumatic sealer for steel strap with double notch
Pneumatic Sealer, Model STP-DN 19-32 for steel strapping.
“User friendly pneumatic sealer, rugged design and reliable to use in industrial applications.
The sealer group could be turned to have an ergonomic and confortable use,
Available standard in three sizes: 19mm(3/4″), 25mm(1″) and 32mm(1-1/4″).”
Manual Sealless Tool – ST ima13-19
ST IMA 13-19
Manual seal-less strapping tool for steel strap
It is an easy-to use strapping tool. It is designed for use in medium- and heavy-industrial applications. The tool is packaged with strap guides for 16 mm straps (standard) and for 13 mm and 19 mm straps. For heavy-duty applications, it is available as standard in the IMA G version, equipped with a steel-made tension lever and rear take-up wheel protection.
- Package type:
- flat/round surface
- Strap quality: steel (Rmax. 880 N/mm²)
- Strap width: from 13 mm up to 19 mm
- Strap thickness: from 0.45 mm up to 0.7 mm (Rmax. 850 N/mm²)
- Strap thickness: from 0.45 mm up to 0.6 mm (Rmax=880 N/mm²)
- Max. tension: 5000N
Joint type: sealless - Weight: 4 Kg / 4.5 Kg
Pneumatic Combinatin Tool / ST 10-19
Pneumatic strapping tool for steel strap – ST 10/19
Pneumatic Strapping Tool for Steel Strap with Seal.
It is a light, compact, and easy-to-use strapping tool. It is designed for use in industrial medium and light applications. The tool is available in different configurations. The standard version is equipped with a push button. On request, it is also available in the choke collar version. The tool is available in 4 strap sizes: 10 mm, 13 mm, 16 mm, and 19 mm.
- Package type: flat / round surfaces
- Strap quality: steel (Rmax. 1100 N/mm²)
- Strap width: from 10 mm up to 19 mm
- Strap thickness: from 0.4 mm up to 0.8 mm (Rmax. 850 N/mm²)
- Strap thickness: from 0.4 mm up to 0.63 mm (Rmax. 1100 N/mm²)
- Max. tension: 1500N – 3000N – 4500N
- Max. tensioning speed: from 5 m/min. up to 11 m/min.
- Joint type: overlap with seal – single notch (min. length 22 mm)
- Air pressure: 6 – 7 bar max.
- Air consumption: 12 l/s
- Weight: about 4 Kg
Manual Sealer sdn19-32
SDN 19-32
Manual Sealer with double notch seal for steel strap
It is a low-cost and easy-to-use manual sealer to be used in conjunction with STTR and STTMR models. It is a strong and reliable tool designed for use in industrial applications. The tool is available as standard in 3 strap sizes: 19 mm, 25 mm, and 32 mm.
- Package type: flat/round surfaces
- Strap quality: steel (Rmax. 850 N/mm²)
- Strap width: from 19 mm to 32 mm
- Strap thickness: from 0.6 mm up to 1.1 mm
- Joint type: seal – double notch
- Seal type: overlap (length min. 45 mm)
- Weight: 2.8 Kg
Manual Tensioner – STTMR 19-32
STTMR 19-32
Manual Tensioner for steel strap
Manual Tensioner for Steel Strap with Seal.
It is a low-cost and easy-to-use manual tensioner to be used in conjunction with STP, STP-DN, STPM, and SDN models. It is a strong and reliable tool designed to use in industrial applications. The particular conformation is able to use straps from 19mm up to 32mm without any adjustments.
- Ergonomic & modern design
- Light & compact
- Easy to use
Manual Sealer – STPM 19-32
Manual Sealer for Steel Strap with Single Notch
It is a low cost and easy to use manual sealer to be used in conjunction with STTR and STTMR models. It is a strong and reliable tool designed to use in industrial applications. The tool is available as standard in 3 strap sizes: 19 mm, 25 mm and 32 mm.
- Package type: flat / round surfaces
- Strap quality: steel (Rmax. 850 N/mm²)
- Strap width: from 19 mm to 32 mm
- Strap thickness: from 0.6 mm up to 1 mm
- Joint type: seal – single notch
- Seal type: overlap (length min. 45 mm)
- Weight: 2.8 Kg
Manual Sealless Combination ST-ECO 13/19
ST-ECO 13/19
Manual Sealless Strapping tools for steel strap
It is a low-cost, compact, and easy-to-use strapping tool. It is designed for use in medium- and light-industrial applications. The tool is packaged with strap guides for 16 mm straps (standard) and for 13 mm and 19 mm straps. It is not recommended for high-tensile straps.
- Package type: flat / round surface
- Strap quality: steel (Rmax. 850 N/mm²)
- Strap width: from 13 mm up to 19 mm
- Strap thickness: from 0.45 mm up to 0.6 mm
- Max. tension: 4000N
- Joint type: sealless
- Weight: around 3.5 Kg
Manual Sealless Tool – ST IMA HT 13-19
ST IMA HT 13-19
Manual Sealless Combination Tool for Steel Strap
It is a user-friendly strapping tool. It is provided with a rugged construction for heavy-duty applications. The tool is packaged with strap guides for 16 mm straps (standard) and also for 13 mm and 19 mm straps. All wearing parts are covered with titanium (TIN). It is equipped with a steel tensioning lever.
- Package type: flat or round surface
- Strap quality: steel. (Rmax. 1100 N/mm²)
- Strap width: from 13 mm up to 19 mm
- Strap thickness: from 0.4 mm up to 0.8 mm (Rmax. 850 N/mm²)
- Strap thickness: from 0.4 mm up to 0.63 mm (Rmax. 1100 N/mm²)
- Max. tension: 5500N
- Joint type: sealless
- Weight: around 4.6 Kg
Battery Tensioner ELECTRA™ STT
ELECTRA™ STT
Tensioning and steel tools for lashing applications
- Strapping Specification Steel
- strapping type EN 13247
- Strapping Width mm (“) 32 (1¼”)
- Strapping Thickness mm (“) 0,80 ÷ 1,27 (0.02 ÷ 0.05)
- Strapping Tension Adjustable from 1000 to 12000 N
- Tension Speed mt/min (ft/min) 5,7 (18.7)
- Amount of cycles achievable
(battery fully charged) 200
Pneumatic Combinatin Tool – STS 25-32 plus 4
-
STS 25-32
Pneumatic Combination Tool for Steel Strapping
It is a powerful and reliable strapping tool. It is designed to use in heavy duty industrial applications, particularly in low pressure air plants. Thanks to the new design (smaller, reinforced and lighter body compared with the previous HT model), the tool can work perfectly even with low air pressure (from 4.5 bars) and can offer a constant and superior seal notch integrity. The body is smaller and lighter than the previous STSR 32 HT allowing for easier handling. The lower air pressure function (from 4.5 bar) is also available for 25 mm steel
- Package type: flat/round surface
- Strap quality: steel (Rmax. 1100 N/mm²)
- Strap width: 25 mm – 32 mm
- Strap thickness: 0.6 mm – 1 mm (Rmax. 850 N/mm²) max. 0.8 mm at 4.5 bar
- Strap thickness: 0.6 mm – 1 mm (Rmax. 1100 N/mm²) max 0.9 mm at 6.3 bar
- Max. tension: 9000N (with standard motor at 6.3 bar)
- Max. tension
- speed: 6 m/min. (at 6.3 bar)
- Joint type: overlap
- seal – double notch (Min. length 45 mm)
- Air pressure: 4.5 – 7 bar max.
- Air consumption: 12 l/s
- Weight: about 10,8 Kg
Pneumatic Combination Tool – STSR 19-32
-
STSR 19-32
Pneumatic strapping tool for steel strap with seal
It is a powerful and reliable strapping tool. It is designed for use in industrial heavy-duty applications. The new 2-button model is equipped with a STOP button. The tool is available as standard in 3 strap sizes: 19 mm, 25 mm, and 32 mm.
- Package type: flat / round surfaces
- Strap quality: steel (Rmax. 1100 N/mm²)
- Strap width: from 19 mm up to 32 mm
- Strap thickness: from 0.6 mm up to 1 mm (Rmax. 850 N/mm²)
- Strap thickness: from 0.63 mm up to 0.8 mm (Rmax. 1100 N/mm²)
- Max. tension: 9000N
- Max. tension speed: around 6 m/min.
- Joint type: overlap seal – double notch (min. length 45 mm)
- Air pressure: 6 – 7 bar max.
- Air consumption: 12 l/s
- Weight: about 10 Kg
Pneumatic Combination Tool ST-INCA-HT 13-16-19
-
INCA HT 13-16-19
Pneumatic seal-less strapping tool for steel strap
INCA is a SIAT pneumatic seal-less strapping tool for steel straps. It is a reliable strapping tool designed for use in medium- and heavy-duty industrial applications. It is equipped with two different tension motors. The tool is available as standard in 2 strap sizes: 16 mm and 19 mm.
Compact pneumatic, sealless strapping tool for steel strap designed to be used in medium / heavy industry applications. Available for three sizes of strap 1/2″(13mm), 5/8°(16mm), 3/4″(19mm) and two different tension motors.
Pneumatic Combination Tool ST-INCA-HT 13-16-19
-
IMA DP 13-19
Pneumatic sealless strapping tool for steel strap
Pneumatic Sealless Comb. tool, Model IMA DP 13-19 for steel strapping.
- Strap Size: 13-16-19mm
- Model & Make: SIAT, MJM, Italy
- Function: Tightening (Pneumatic) & Sealing (Manual) without Seal
Compact pneumatic, sealless strapping tool for steel strap designed to be used in medium / heavy industry applications. Available for three sizes of strap 1/2″(13mm), 5/8°(16mm), 3/4″(19mm) and two different tension motors.
Dispenser/Cart for steel strap SEH71F
-
DISPENSER – SEH0000071F
Dispenser or Cart for Steel Strap
- Strap Size: All Sizes
- Model & Make: SIAT, MJM, Italy
- Function: Carrying strap roll on site
GT Max / Automatic Battery for Plastic Strap
-
Automatic Battery for Plastic Strap
Automatic Battery Strapping Tool for PET Strap.
Battery strapping tool with adjustable functioning modes according to the application: automatic, semi-automatic, manual, and soft. Suitable for heavy-duty environments. Perfectly balanced, it can perform both vertical and horizontal strapping. The brushless motor with encoder is powered by the latest Li-Ion battery.
- Package type: Flat
- surface (min. 400 mm) / Round surface (min. diam. 1000 mm)
- Strap quality: PET
- Strap width: 25 mm / 32 mm
- Strap thickness: from 0.9 mm up to 1.30 mm
Max. tension on single - strap: 6.500 N Max.
- tension on the
- package: 13.000 N Max. tension speed: 5,0 mt/min
- Joint type: Friction weld seal
- Weight: 6,2 kg (including battery)
- Battery: Akku Power SP7 36 Vdc 5 Ah Li-Ion
Pneumatic Strapping Tool For PP & PET Strap / Poli LT
-
Pneumatic Strapping Tool for Plastic Strap
Pneumatic Strapping Tool for PP/PET Strap.
It is a compact, easy to use and versatile strapping tool. It is designed for use in industrial applications, especially with PP strap. The tool is available for 4 strap sizes: 10 mm, 13 mm, 16 mm and 19 mm.
- Package type: flat and round surface
- Strap quality: PP – PET
- Strap width: from 10 mm to 19 mm
- Strap thickness: from 0.4 mm to 0.9 mm
- Maximum tension: 2500 N (adjustable by friction system)
- Maximum tension speed: around 11 m/min.
- Joint type: friction weld seal
- Air pressure: 6 -7 bar max.
- Air consumption: 12 l/s
- Weight: around 4.9 Kg